Support Articles — Properties

Configuring Device Alarms

Posted on

Device alarms (also referred to as hardware alarms) can be configured to activate an LED light on a logger to flash, and/or an audible alert to sound on RF2000A series loggers, when readings fall outside of user-specified thresholds.

Device alarms can be enabled and configured via the MadgeTech 4 software. The alarm configuration menu will vary somewhat depending on the model of logger being used, but the basic steps for configuring the alarms will be similar. Below are descriptions of features that are common to all models, as well as additional descriptions of features that are specific to particular models.

Continue reading Configuring Device Alarms

Trigger Settings for Data Loggers

Posted on

Trigger settings restrict data loggers from recording until thresholds are reached or exceeded. These thresholds are called trigger start setpoints, and can be configured through the data logger’s Properties menu, under Trigger.

Continue reading Trigger Settings for Data Loggers