Data Logger Support Articles | MadgeTech

Wraparound Mode

Posted on November 23, 2020December 1, 2020 by Joshua Boone

To understand what Wraparound Mode does, it’s important to grasp the concept of how a data logger behaves under normal circumstances.

Cycle Detection for Lethality in MadgeTech 4

Posted on November 2, 2020December 1, 2020 by Chris Morse

The ability to calculate lethality is a useful feature in the MadgeTech 4 software. MadgeTech 4 contains formulas that allow the user to automatically calculate A0, F0, Fd, Fh, and Pasteurization Units (PU), using either Math Channels or Statistics Reports. Instructions for adding lethality statistics to reports can be found in the following article: Calculating Lethality in MadgeTech 4 | MadgeTech

While Math Channels and Statistics Reports will use the same mathematical formulas to calculate lethality, there is an important distinction in the behavior of the two methods that users should be aware of when analyzing lethality results. Math Channels will automatically detect new lethality cycles when calculating lethality values, while lethality statistics added to a Statistics Report will not.

Trigger Settings for Data Loggers

Posted on November 2, 2020 by Joshua Boone

Trigger settings restrict data loggers from recording until thresholds are reached or exceeded. These thresholds are called trigger start setpoints, and can be configured through the data logger’s Properties menu, under Trigger.