Skip to Main Content »

MadgeTech Data Logger Software Downloads

Data Logger Software

Madgetech Data Logger Software

The MadgeTech Data Logger software requires an IBM
or compatible PC with the following:

  • PC-compatible Pentium(R)-class system
  • Windows XP/Vista/Windows 7 (32 and 64 bit) and Windows 8
  • Color SVGA monitor (800 x 600 resolution)
  • 128 MB (or more) RAM
  • At least 30MB free hard disk space (for installation)
  • CD-ROM (for installation media)
  • Available 9 pin male serial (COM) port (for serial
    logger interface cable)
  • Available USB port (for USB logger interface cable)

Secure Software

 

MadgeTech Standard Software

  Choose a Software VersionDate ReleasedVersion 
  MadgeTech 4 Standard June 4, 2013
4.1.5
  MadgeTech 2 Standard February 14, 2013
2.07.1

 

USB

USB Drivers Tech Note
Updating USB Driver Installation Files Tech Note

  DriversVersion                      
  IFC200, IFC202, IFC300
  IFC400 or RFC1000
For Software Version 2.03.6 or Newer
  Keyspan For Windows 2000/XP/2003/Vista
  Keyspan For Windows 7

 

MadgeNet Data Logger Software

  Choose a Software VersionDate ReleasedVersion 
  MadgeNet April 5, 2013
1.4.13

 

MadgeTech Transit Data Logger Software

  Choose a Software VersionDate ReleasedVersion 
  Transit Software February 14, 2013
2.07.1

 

MadgeTech Pocket Data Logger Software

The MadgeTech Pocket Software requires a PDA with the following:

  • Windows Mobile 5 Classic (or better)
  • ARM v4i Class Processor
  • Bluetooth Port (Microsoft or Broadcom stack)
  • .Net Compact Framework 3.5
  • 1MB free storage space (internal memory or storage card)

 

  Choose a Software VersionDate ReleasedVersion 
  Pocket PC (Windows Installer) September 10, 2012 1.01.00
  Activesync   Current
  .Net Compact   Current

 

Disclaimer: MadgeTech makes no warranty that its software will install, run or perform on any operating system, nor does MadgeTech warrant that its software will not interfere with or degrade the performance of any other software. Purchaser is solely responsible to install, test and use MadgeTech software properly. MadgeTech will not be held responsible for any consequential or indirect loss or damage arising from the download (including computer viruses), installation or use of any software downloaded, or from failure to meet specifications or legislation or to supply advice or information. MadgeTech reserves the right at any time to change the specification of their products without notification.