MadgeTech, Inc. Secure Data Recorder Software Release Notes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.8 February 23, 2023 ------------------------------------------------------------------------ -Fixed missing manual start for rev 3 Cryo-Temp, LyoTemp -Fixed incorrect reading interval support for rev 3 Cryo-Temp, LyoTemp -Fixed alarm settings not writing correctly for rev 3 Cryo-Temp, LyoTemp ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.6 January 10, 2023 ------------------------------------------------------------------------ -Added support for rev 3 Cryo-Temp, LyoTemp -Added support for rev 5 PR1000, PR1000IS, PR1000Ex -Fixed Connected devices tab becoming selected when ctrl-clicking to deselect a dataset -Fixed time marker color gradient when printing data table reports ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.5 October 18, 2022 ------------------------------------------------------------------------ -Fixed printing or print previewing data table reports after installing Windows update KB5017858 or KB5017859 -Fixed real time reading retrieval when any channels are disabled -Fixed error that could occur during a "no readings" alarm rule check ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.4 September 20, 2022 ------------------------------------------------------------------------ -Added support for rev 4 Process101A, Pulse101A, State101A, Event101A, Volt101A, Bridge101A -Added support for rev 5 PRHTemp101A -Fixed NTC and RTD readings when importing Titan data -Fixed ambient calibration not being appled when importing Titan data -Fixed temperature sensor range for PR1000 -Fixed .xlsx export failing for reports containing time markers -Fixed extra columns appearing and being unable to save when removing multiple channels at once from a data table report ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.2 July 7, 2022 ------------------------------------------------------------------------ -Added support for rev 4 Temp101A, TC101A, RTDTemp101A -Added support for rev 5 RHTemp101A -Added support for rev 5 Temp1000IS, Temp1000Ex -Added support for rev 6 PR140, PRTemp140, HiTemp140X2 (all), HiTemp140-FR, LCS140, RHTemp1000, RHTemp1000IS, RHTemp1000Ex -Added support for rev 7 HiTemp140-M12 -Added support for rev 7 RFOT -Added support for IFC200A -Fixed crashing sometimes when changing HiTemp140 trigger settings ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.24.0 April 14, 2022 ------------------------------------------------------------------------ -Added support for rev 9 HiTemp140 -Added support for rev 10 HiTemp140-PT -Added support for rev 6 HiTemp140-FP -Updated bundled drivers to new WinUSB-based version -Changed USB driver usage to be based on whether SiUSBXp.sys is present -Reduced the frequency of cloud notifications when readings fail to upload -Fixed MicroTemp100 name -Fixed RTD temperature resolution -Fixed VFC2000 display settings not being visible -Fixed reading status annotations sometimes erroneously appearing -Fixed readings for single-channel math channels not being added or updated in open data table reports during real time -Fixed being unable to save new real time reports in time zones with positive UTC offsets -Fixed ribbon minimize button localization not updating -Fixed theme accent label not being localized -Fixed interop readings not taking ambient temperature into account for thermocouple channels and some legacy humidity channels -Fixed readings from imported MTB files sometimes being inaccurate when an engineering unit with a gain of 1 is used -Fixed crashing sometimes when using the "readings" stop method and changing the reading count -Fixed error or entries being clipped sometimes when attempting to print audit trail using paper sizes larger than A4 ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.22.0 March 30, 2021 ------------------------------------------------------------------------ -Added support for VFC2000 -Added support for PR1000, PR1000IS, PR1000Ex -Added support for rev 3 MicroTemp -Added support for rev 5 HiTemp140-FP, HiTemp140-FR, HiTemp140X2 (all), RHTemp1000, LCS140 -Added support for rev 6 HiTemp140-M12 -Added support for rev 7 HiTemp140 -Added support for rev 8 HiTemp140-PT -Added support for USB drivers that utilize WinUSB -Added kg/cm2 pressure unit -Relative Humidity math channel can be applied to thermocouple and RTD channels -Visible Delta column in data table reports will appear on printouts -Fixed partially hidden data at the bottom of the first page of unsigned data table printouts -Fixed straight horizontal graph lines sometimes disappearing while zoomed in -Fixed not being able to save a graph report after creating an annotation, saving, then editing the annotation -Fixed pulse unit descriptions not appearing correctly in graph axis context menu -Fixed unit description localizations not updating until the graph context menu is opened -Fixed fixed value line disappearing when changing the line unit -Fixed value line not reappearing in a loaded report after an applicable channel is made visible -Fixed value line sometimes disappearing when changing units -Fixed value line values sometimes not rounding properly when loading a report -Fixed not being able to disable horizontal autoscroll using the graph context menu after being enabled -Fixed being able to enable horizontal autoscroll using the graph context menu for real time datasets that aren't active -Fixed data table column sorting not being preserved when exporting to Excel -Fixed statistics not being sortable if any channel values are "-" -Fixed reports with Relative Humidity math channels failing to load -Fixed Relative Humidity math channel not displaying data if any wet-bulb values are above their associated dry-bulb values -Fixed time marker moving when saving, closing, and loading a report when a DST change has occurred since the data was recorded -Fixed workflows with an "any device" trigger being stuck in "Running" status when manually run and a wireless device has lost communication -Fixed workflow name not appearing correctly in error notifications -Fixed alarm rule not triggering if "all conditions are met" is selected while in a time zone with a positive offset -Fixed alarm rule not triggering when using a "no readings" trigger and a wireless device resets and stops on its own -Fixed error during real time when the device channel associated with the alarm rule is disabled -Fixed channel unit ribbon dropdown not localizing properly after changing the software language until the software is restarted -Fixed erroneous "device memory will be filled" message when starting a device with delay start and stop times set and wraparound disabled -Fixed alarm delay not displaying properly or writing to devices other than RF2000A series -Fixed missing "Delete" context menu option for items in the Deleted Datasets and Deleted Reports folders -Fixed crashing when stopping real time after an alarm rule triggered and any device channels are disabled -Fixed crashing when attempting to apply a Relative Humidity math channel to live real time data -Fixed crashing when selecting "Select Current Time Scale" and no data is currently within the viewing area -Fixed crashing sometimes when adding a value line to a report containing no data -Fixed crashing sometimes when zooming a graph by left or right double-clicking -Fixed crashing when moving a fixed value line for a thermocouple channel displaying data as temperature -Fixed crashing sometimes when removing a time marker -Fixed crashing sometimes when reordering alarm rules -Fixed crashing sometimes when dragging a dataset or report -Fixed crashing during log time recalculation when configuring device start options -Fixed crashing when running multiple thermocouple devices in real time with a mix of temperature and voltage thermocouple types -Fixed crashing when attempting to use the password feature of a PR1000 ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.18.0 April 7, 2020 ------------------------------------------------------------------------ -Added support for rev 5 PR140, PRTemp140 -Added support for LCS140 -Added support for more X series devices -Added math channel that calculates humidity using wet-bulb and dry-bulb temperatures -Added timeslice option to select data within the current time scale -Improved startup time when the File Database panel has a large number of folders -Changed first run time of a workflow to be based on the selected recurrence pattern, which may result in a calculated run time later than the configured trigger time -Fixed some text not being localized for languages other than English -Fixed "fit to view" moving graph data after all channels were hidden then un-hidden -Fixed incorrect shock device status when starting with triggers enabled -Fixed TC101A alarm values when using a type B thermocouple -Fixed value lines sometimes disappearing when changing units -Fixed original values of fixed value lines sometimes changing when switching to another unit and back again -Fixed math channel property changes not marking the report as modified -Fixes towards alarm or trigger setting updates "timing out" when custom starting with multiple devices or batch starting -Fixed daily workflows incorrectly calculating the "next run time" after the workflow has triggered once -Fixed weekly workflows showing a "next run time" with an incorrect time -Fixed weekly workflows not applying the chosen week interval correctly -Fixed weekly and monthly workflows sometimes not triggering -Fixed monthly workflows sometimes incorrectly calculating the "next run time" when the day number is near, or at, the end of the month -Fixed alarm rule notifications not occurring at the specified interval after stopping and restarting a device -Fixed data table column sorting not being preserved when exporting to Excel -Fixed crashing when trying to configure a monthly workflow to use a day number not valid for the selected month -Fixed crashing when trying to use an engineering unit that originally used a predefined destination unit and was later changed to use a custom unit in the same software session -Fixed crashing sometimes when changing a device's thermocouple type to Millivolts and applying settings -Fixed crashing when setting a delay start time far in the future and enabling automatic stop while custom starting a device -Fixed toward crashing sometimes during real time when new data after a discontinuity is added to a graph -Fixed rare crash when renaming a folder or report channel -Fixed rare crash when enabling horizontal autoscroll -Fixed rare crash when deleting a report folder -Fixed crashing when selecting the "Select All" timeslice option in a report with no visible data ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.16.0 December 3, 2019 ------------------------------------------------------------------------ -Added support for Temp1000Ex and RHTemp1000Ex -Added support for TCTempX16 -Added support for Shock300 -Added ability to automatically test email settings -Reading and trigger counts displayed together when applicable -Firmware upgrading disabled for devices running in real time -Updated A0 statistic and math channel default tmin to 65 °C and tref to 600 seconds -Fixed changes to device properties reverting when accessing the dialog multiple times from the Start dialog -Fixed cloud downloads sometimes failing due to a "collection was modified" error -Fixed initial device cloud status sometimes being incorrect -Fixes towards cloud website URLs opening in the wrong browser -Fixed timeslice location when saving a report after a DST change since the data was recorded -Fixed timeslice rounding to the nearest second in new reports -Fixed timeslice boundaries not adjusting properly for data recorded at 1 KHz or faster -Fixed timeslice boundaries sometimes taking hidden data into account -Fixed missing timeslice "Start" and "End" input labels -Fixed timeslice being editable in a locked graph report -Fixed graph time axis sometimes showing the wrong values when opening a locked graph report -Fixed "readings" stop method not working in time zones with a positive UTC offset -Fixed graph cursor tooltip rounding timestamp to the nearest millisecond when viewing data recorded at 1 KHz or faster -Fixed crashing sometimes when navigating a graph using the arrow keys -Fixed graph axes changing positions when toggling visibility of all channels at once -Fixed selecting a reading in a graph report not auto-scrolling a linked data table report that isn't visible -Fixed save prompt not appearing when logging out -Fixed additional save dialog appearing when closing the software with a report in a floating window -Fixed "trigger(s)" not being localized in Readings column of device list -Refreshing no longer affects devices running in real time via USB -Fixed theming not applying to some email settings UI -Fixed UltraShock real time data not opening if triggeres were enabled -Fixed having to apply UltraShock range changes twice -Fixed being able to disable all UltraShock channels -Fixed Display tab appearing in Device Properties for some devices that don't support display settings -Fixed time marker timestamps displaying in UTC in report properties -Fixed some device names when configuring alarm rule and workflow triggers -Fixed selected contacts being cleared for alarm rules containing six or more actions -Fixed missing report signature when printing through print preview -Fixed interop error that was causing the output type that encountered the error to stop working until a software restart -Fixed crashing sometimes when starting devices -Fixing clicking report tabs not selecting the report -Fixed time markers not appearing properly in data table reports -Fixed error when saving a report to an Excel file and using a time format without AM/PM ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.14.0 March 12, 2019 ------------------------------------------------------------------------ -Added support for rev 6 RFOT -Added support for rev 4 UltraShock -Added support for tri-LED functionality of IFC406 rev 2 -Added Polish localization -Added support for saving a report to an Excel file (experimental) -Added hectopascal (hPa) unit -Improved theming to be more consistent -Added Metro Light, Metro White, and Metro Dark themes, including accent options for Metro Light and Metro White -Removed Luna and Royale themes -Removed inline editing a report name within its tab due to the functionality being removed in newer versions of the third-party UI controls. The tab context menu can still be used to rename open reports. -Removed check that determined whether Excel was installed when exporting -Destination email address can now be specified when testing email settings -Changed Volt101A-160mV and RFVolt2000A-160mV default unit to millivolts -Added text wrapping to notifications -Application exit is recorded to audit trail -Renamed "Cancel" button in the login dialog to "Exit" -Automated actions are now recorded to the audit trail as "SYSTEM" while logged out -Fixed IFC200 and IFC300 sometimes not detecting devices properly -Fixed wireless device status sometimes not updating properly when the RFC1000 is disconnected -Fixed wireless devices sometimes running in real time after disabling wireless, starting while plugged in, then re-enabling wireless -Fixed Display tab not appearing in Device Properties for Quad/Oct devices with a display -Fixed time zone sometimes not updating when starting a device -Fixed not being able to change the unit of a statistic if the first listed channel of that unit type is hidden -Fixed threshold-based time statistic values when data crosses a DST change -Fixed threshold-based time statistic values being inverted for state data -Fixed state and event timestamps due to the time zone offset being applied twice -Fixed Add and Remove buttons next to the workflow email list being cut off in some localizations -Fixed graph lines with very small value changes not lining up correctly with axes when zooming in extremely far -Fixed alarm rule unit appearing blank on software restart when an engineering unit is selected -Fixed wrong alarm rule unit being used on software restart when a unit derived from an engineering unit is selected -Fixed alarm rule notification interval input sometimes appearing initially disabled when that option is selected -Fixed delta values in data table reports when data crosses a DST change -Fixed report tabs closing when resetting the screen layout -Fixed crashing sometimes when changing the unit of a report channel to an engineering unit -Fixed crashing sometimes when renaming a report through the Files panel ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.12.1 August 16, 2018 ------------------------------------------------------------------------ -Fixed interfaces not being recognized in certain 64-bit environments -Accessing the Options dialog with no printers installed should no longer cause a crash -Removed erroneously displayed workflow actions that would cause a crash when added to a workflow and attempting to save -Fixed incorrect workflow name in emails following a workflow failure -Fixed devices not starting in real time during a workflow when logged out -Fixed not being able to calibrate devices without the "Modify device settings" permission -Fixed grammatical error in message that appears when trying to calibrate a device without the required permission -Fixed printing device properties failing if the device has alarming or triggering features -Fixed horizontal autoscroll focusing on the wrong area of the graph -Fixed last audit trail entry being excluded from printouts -Seconds are editable when filtering audit trail -Fixed audit trail entries sometimes not filtering properly if the timestamp matches the start or end time entered -Fixed language of search dropdowns sometimes not updating -Fixed operating ranges for CryoTemp, LyoTemp, TransiTempII(-RH) -Fixed sensor range for HiTemp140 and HiTemp140-FR ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.12.0 April 23, 2018 ------------------------------------------------------------------------ -Added support for running as a 64-bit program -Added default print settings -Added options to retry and/or email contacts when a workflow fails -Added support for QuadProcessV2, OctProcessV2, QuadVoltV2, OctVoltV2, QuadRTDV2, OctRTDV2, QuadTCTemp(2000)V2, OctTCTemp(2000)V2 -Graph legend can be hidden when printing -Improved report channel visibility toggling performance -Sterilization statistics calculate lethality for readings equal to Tmin -Creation dates and reading timestamps in report printouts use system date and time formatting -Numbers formatting uses system settings -Renaming a report using the Files panel context menu no longer requires a software restart to take effect -Downloading data from a wireless device should succeed more often when device communication is unstable -Engineering units loaded with datasets are selectable -Rate units can be applied to math channels -Print settings are reverted in the Print Preview dialog if a change results in the contents not fitting on the page -Fixed timestamps that cross a Daylight Savings Time change -Fixed reports sometimes failing to load if they were originally created in a different time zone -Fixed wrong column sometimes being removed when removing a channel from a data table report -Fixed exporting more than 26 channels of data to Excel -Fixed printing failures when the device ID has invalid, sometimes invisible characters -Fixed report titles sometimes being truncated on printouts -Fixed statistics reports sometimes failing to print -Fixed channel sometimes not selecting when selecting a graph point -Fixed graph axes sometimes not being removed properly -Fixed alarm rule status reverting when canceling an edit -Fixed "no readings" alarm rules not triggering when a device goes offline or is disconnected -Fixed "Silence Alarm" button in wireless alarm notifications not working -Fixed USB file and driver versions displayed in the About dialog -Fixed "download" and "create report" workflow actions sometimes failing when triggered by multiple devices -Fixed dragging a folder sometimes moving the wrong folder -Fixed device status changes not appearing in the software language -Fixed pulse rate units sometimes not calculating readings correctly in reports containing multiple datasets with different reading intervals -Fixed rate unit offset not being applied -Fixed delay when expanding print layout options -Fixed page size descriptions sometimes being truncated -Fixed cloud website URLs sometimes opening in File Explorer instead of a browser -Fixed crashing when creating similar engineering units and switching between them in the Engineering Units dialog -Fixed crashing sometimes when closing an empty graph report -Fixed crashing sometimes when downloading data -Fixed crashing sometimes when received wireless backfill data is added to a dataset in an open data table report ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.10.1 November 29, 2016 ------------------------------------------------------------------------ -Added support for RFCO2RHTemp2000A with a 5% CO2 sensor -Fixed data table performance ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.10.0 November 1, 2016 ------------------------------------------------------------------------ -Added support for Element-HT and Element-CO2 -Added Alarms column to data table reports to display "high" and/or "low" alarm statuses in real time datasets -Alarms are now automatically written to files within the preferences folder -Entries in the Alarm Log dialog are now saved between software sessions -Notifications are now automatically written to files within the preferences folder -Statistics reports can now be exported to Excel -Improved report folder load time -Splash screen no longer stays on top of other windows -Fixed installation sometimes failing due to language selection -Fixed reading numbers sometimes being off by one when loading a dataset -Fixed extra graph axes sometimes appearing when changing units -Fixed timeslice "Select all" including hidden data -Fixed units changing while configuring multiple fixed value lines -Fixed rounding when calculating math channel values -Fixed "no readings" conditions not triggering alarms when the alarm rule contains other conditions that aren't "no readings" conditions -Fixed crashing sometimes when trying to download cloud data -Fixed crashing sometimes when cloud connection is lost -Fixed crashing sometimes when clicking links and buttons that open a browser window -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.8.0 June 27, 2016 ------------------------------------------------------------------------ -Added Czech, Lithuanian, Russian, and Ukrainian localizations -Added user permissions for moving and deleting datasets or reports -Device properties can be printed -Cloud data can be downloaded -HiTemp140X2 temperature channels are now numbered -Corrected RHTemp1000 operating and measurement ranges -Updated RHTemp1000IS operating and measurement ranges -Cooling flags now display at temperatures below 40 °F after the temperature increases by up to 2 °F before decreasing -Fixed device ID being editable regardless of user permissions -Fixed alarm settings sometimes being editable regardless of user permissions -Fixed being able to save to file regardless of user permissions -Fixed math channels sometimes not correctly displaying channels as being selected -Fixed chart labels having the same name when exporting multiple datasets with at least one channel hidden -Fixed alarm and trigger input values sometimes being rounded incorrectly -Fixed crashing when writing QuadTemp2000 or OctTemp2000 settings with all channels disabled -Fixed crashing when viewing the properties of a thermocouple device having a temperature thermocouple type and the preference unit is in voltage -Fixed crashing when opening reports saved in certain time zones -Fixed crashing when adding an alarm rule condition with no device selected -Fixed crashing when editing certain statistics in an empty report -Fixed crashing when trying to add more than two channels to a subtraction math channel -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.6.2 January 4, 2016 ------------------------------------------------------------------------ -Fixed a device identification issue when refreshing the connected devices list ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.6.1 November 12, 2015 ------------------------------------------------------------------------ -Fixed a device identification issue ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.6.0 September 21, 2015 ------------------------------------------------------------------------ -Added French, German, Spanish, Chinese (simplified), and Korean localizations -Updated cooling flags behavior to work with multiple increase/decrease trends -A rise of more than 5 °F for temperatures above or at 40 °F, or a rise at all for temperatures below 40 °F, will prevent further cooling flags from being displayed until the first flag's threshold is reached again -Sterilization statistics can be displayed on graphs -SDF report files and MDB audit trail files can be viewed in read-only mode -Installation can be automated with msiexec arguments -Device ID changes on wireless devices are more quickly displayed -Fixed interop not working -Fixed Export All Data to Excel only exporting timeslice data when a timeslice is visible -Fixed cooling flags sometimes not exporting to Excel -Fixed cooling flag units only updating for one channel -Fixed cooling flag annotations not being removed from a graph when removing channels -Fixed graph view, time marker locations, and timeslice locations when opening reports in a different time zone (existing reports must be re-saved for this to take effect) -Fixed occasional crashing when connecting a device -Fixed crashing when attempting to access the Options dialog more than once -Fixed crashing when attempting to print a data table report containing time markers and a visible Reading column -Fixed units not changing in reports generated from other reports -Fixed alarm rules sometimes reverting unit settings -Fixed graph legend on printouts sometimes getting cut off -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.4.0 April 10, 2015 ------------------------------------------------------------------------ -Added Finnish and Portuguese (Brazil) localizations -Added support for HiTemp140-M12 -Added cloud features -Added summary and dataset information to statistics reports -Added Exchange support in email settings -Added Fh and Fd statistics -Alarm rules can be duplicated -Device ID is displayed where applicable when editing alarm rules -Engineering units can be applied to individual report channels -Corrected TempRetriever and TempRetrieverRH operating range -Corrected Therm.A.Lert and Therm.A.Lert-RH operating range and ambient range -Fixed wireless real time data sometimes not displaying in an automatically generated graph -Fixed alarm notifications initially displaying incorrect threshold values if the device alarm went off while the software wasn't running -Fixed duplicate readings sometimes appearing in datasets if wireless communication is interrupted while a device is running in real time -Fixed first and last readings sometimes being excluded from a data table report when a timeslice is enabled -Fixed a display issue when zooming a graph containing multiple datasets -Fixed a display issue when adding multiple datasets to a new graph -Fixed value lines sometimes not displaying correctly after changing the graph scale -Fixed print settings being ignored when printing a report through print preview -Fixed graph line sometimes displaying too many discontinuities in real time data -Fixed workflows not functioning correctly when saving data or creating reports in a folder that doesn't already exist -Fixed crashing when adding a time marker to a report containing data recorded at a 1024 Hz reading interval -Fixed crashing when attempting to copy data from a data table containing time marker rows -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.2.0 November 13, 2014 ------------------------------------------------------------------------ -Added support for HiTemp140-FR, PRTemp140 -Added support for IFC203 -Added alarm acknowledging -Added alarm details to alarm log and email notifications -Multiple alarm notifications can now be selected -Fixed calibration display not updating in the Device Properties dialog after calibrating -Fixed crashing when saving a report containing a Last Value statistic -Fixed installer not running when selecting the same non-English language as the current Windows language -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.0.1 September 12, 2014 ------------------------------------------------------------------------ -Fixed installer not working on some Windows languages -Fixed display language not persisting ------------------------------------------------------------------------ MadgeTech 4 Secure v4.2.0.0 August 22, 2014 ------------------------------------------------------------------------ -Added support for RFCO2RHTemp2000A, HiTemp140-FP, HiTemp140X2-TD-PT, HiTemp140X2-TD-FP, HiTemp140X2-FP-PT, HiTemp140X2-FP, ThermoVault140-PT-1, PR1000IS, QuadState, OctState -Added support for HiTemp140 firmware revision 3.1 -Added horizontal value lines that can be displayed in graphs -Added time markers that can be displayed in graphs and data tables -Added workflows -Added configurable default statistics -Added "Time within range", "Time to threshold (ascending)", "Time to threshold (descending)", and "Last value" statistics -Added Japanese localization -Graph axes can now be individually scaled by either using the Set Scale dialog or holding Ctrl when dragging or zooming an axis -Default unit scales can be configured in the unit preferences -Graph axis labels that can't fully fit on the screen are no longer displayed -Corrected Mean Kinetic Temperature input descriptions -Single point markers will now resize according to line thickness -Default single point marker size has been decreased -Graph annotations not associated with a reading can now be hidden -Selected point information now remains visible when the graph loses focus -Exporting to Excel will now create multiple worksheets if necessary to display all readings -Additional sterilization data can now be displayed in report properties when adding an A0 or F0 statistic -Sterilization and pasteurization statistics now round to 2 digits -Wireless data can now be downloaded while the device is running -Corrected RTDTemp101A measurement resolution -Fixed TransiTemp-EC, TempRetriever, and TempRetrieverRH start dates not being calculated when stopping using the pushbutton before downloading -Fixed wireless devices not appearing in the device list after turning off wireless mode and connecting via USB -Fixed wireless real time data backfill not working when the software crashes and the crash dialog is left open -Fixed crashing when re-opening a saved report containing active real time data and attempting to click a point -Fixed temporary freezing when a wired device is started in real time and immediately unplugged -Fixed additional reports sometimes being created when starting multiple devices in real time -Fixed graph legend overlapping graph when printing -Fixed crashing when opening data table reports containing math channels -Fixed hidden channels appearing on printed statistics reports -Fixed reports opened from file not saving to database when no changes were made -Fixed reports containing math channels with no channels selected not opening -Fixed pinned annotations not staying pinned when re-opening a saved graph -Fixed crashing when exporting timeslice data to Excel and a channel has no readings -Fixed exporting to Excel failing when the default view in Excel isn't Normal -Fixed empty reports not opening -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.9.0 April 1, 2014 ------------------------------------------------------------------------ -Added support for RFCurrent2000A, RFPRHTemp2000A, LyoTemp -Added ambient temperature selection when calibrating pHTemp101 and pHTemp2000 -Added Sum statistic for pulse devices -Process101A data displays in milliamps by default -Alarm and trigger settings are displayed in the device's engineering unit if it has one -Saving a report to database for the first time will bring up a folder selection dialog -Cooling flags can be enabled for graphs that contain more than one dataset -Reports that were previously saved to file will default to "Save to file" in the save prompt that appears when closing the software -Reports containing active real time datasets can no longer be signed or locked -When configuring "Time above" and "Time below" statistics, only the currently displayed units are available for selection -"Time above" and "Time below" statistics will automatically update the unit when a channel unit changes -Timestamps have been added to messages in the Batch Start dialog -Device engineering units should no longer automatically import when they match existing units -Thermocouple channels use the correct color preference -Excel chart title is the report title -Excel tab names include the report title -Excel chart series names include device identifiers based on the "Channel Grouping" selection in the software -"Manage Axis Positions" has been renamed to "Axis Positions" -"Set Cooling Flags" has been renamed to "Cooling Flags" -"Manage Math Channels" has been renamed to "Math Channels" -Fixed HiTemp140 extended range values being clamped to 260 °C -Fixed changes to display settings not writing after settings have been applied once and the Device Properties dialog hasn't been closed -Fixed calibration wizard miscalculating the gain and offset for pHTemp101 and pHTemp2000 when using high/low values -Fixed crashing when a QuadTemp or OctTemp with disabled channels encounters an interruption in communication during real time -Fixed occasional freezing when a wired device is plugged back in after being disconnected during real time -Fixed device ID not writing when a single device is started -Fixed alarm popups displaying both high and low alarm conditions as being met when an RF2000A series device alarm is triggered -Fixed annotations appearing on every reading when a Cryo-Temp or TransiTempII is running in real time -Fixed crashing when cooling flags are enabled and non-temperature data is added to a report -Fixed datasets not restoring from the recycle bin if they were originally in a report before being deleted -Fixed new reports saving to database after saving to file -Fixed graphs not updating the Updated column in the report list when the background color, view, or annotations are modified -Fixed data tables printing all data when a timeslice is created -Fixed changes to Reading column in data tables not saving -Fixed pulse rate unit descriptions not displaying correctly -Fixed display settings not writing if the LCD turns on or off while changing settings -Fixed engineering units with negative gains not displaying correctly and sometimes not writing -Fixed engineering units not appearing in unit preferences after being created until the software is restarted -Fixed statistics views not saving changes when statistics are added or removed -Fixed column widths and statistic property changes in statistics views not saving -Fixed column reordering in data tables and statistics views not saving -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.7.2 September 20, 2013 ------------------------------------------------------------------------ -Fixed Temp1000P and Temp1000S readings -Fixed wireless real time sometimes causing crashing ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.7.0 September 6, 2013 ------------------------------------------------------------------------ -Added support for RFVolt2000A, RFPulse2000A -Added support for IFC406 -Added relative standard deviation statistic -Added start time and end time to report properties -Added Start Time and End Time statistics -Added an option to display the downloaded data of multiple selected devices in a single report -Added elapsed time to cooling flag graph annotations -Cooling flag information now appears in report properties -The "configuration update timed out" error should now appear much less often -Datasets of 101A series devices with trigger settings enabled will now display a reading count -When multiple wireless devices are started together in real time, all datasets will now share the same graph -Alarm rules now allow identical conditions that use devices of the same model but with different serial numbers -Thermocouple data is now more accurate when displaying in a unit other than °C -Engineering units with a negative gain can now be created -Engineering units are now selectable when changing the vertical scale of a graph -Devices with unknown reading rates are now displayed -Grid reports and the Connected Devices and Files panels will now automatically scroll horizontally when dragging columns to reorder them -Grid reports will now display timeslice data -"ID" has been renamed to "Device ID" -"Serial" has been renamed to "Serial No." -"Type" has been renamed to "Model" -Username no longer needs to have exact letter casing when clicking "I forgot my password" on the login screen -Fixed buttons sometimes becoming disabled when a single device is listed and disconnected then reconnected -Fixed crashing when entering invalid characters into a device template name -Fixed alarm rule notification messages accumulating when multiple alarms go off at the same time -Fixed displayed thermocouple voltage always rounding to two digits when not using the Millivolts thermocouple type -Fixed crashing or freezing while multiple devices are running in real time -Fixed sometimes not being able to move or delete real time datasets after devices have been stopped -Fixed sometimes being able to move or delete real time datasets while the devices are still running -Fixed the first point of a hidden graph channel being visible -Fixed engineering unit list in the Engineering Units dialog not updating when the name or destination unit is changed -Fixed inaccurate thermocouple readings at temperatures below -180 °C -Fixed crashing when attempting to view a print preview and no default printer is specified -Fixed duplicate devices sometimes appearing in the device dropdown when modifying an alarm rule condition -Fixed interface list in the Communications tab of the Options dialog being truncated when at least 10 interface cables are connected -Fixed save prompt appearing after deleting an engineering unit and attempting to select another unit -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.6.0 July 12, 2013 ------------------------------------------------------------------------ -Added support for Event101, State101, State110, Event110, State101A, Event101A -Added Locate feature for RF2000A devices -Added cooling flag functionality to graph reports -Added option to toggle graph time zone visibility -Added cursor icons for zoom functions -Added total page count to printouts -Added revision to RFC1000 entries in the interface list -Added date to the popup that appears when selecting a graph point -Added "Add to new report" context item when selecting datasets -Added missing icons to graph context menu -Changed About screen layout -Renamed "Grid" to "Data Table" -Device list column preferences should now save and load properly -Columns in the device list that don't apply to a device now display a hyphen ('-') -The Device ribbon tab now stays selected when starting the software and the "Display an empty graph when the software starts" option is enabled -The first detected device is now automatically selected -Renamed the following device grid columns: --"Comm" is now "Port" --"ID" is now "Device ID" --"Type" is now "Model" --"Serial" is now "Serial No." -"Last Calibrated" is now "Last Calibration" -Leaving email security and authentication settings empty will no longer cause an error to appear when accessing security settings -The Set Scale dialog now rounds vertical scale values when initially displayed -Enable Autoscroll button should now be disabled when viewing inactive realtime datasets -Reports loaded from files will no longer re-import existing datasets when saving to database -RTD devices now display alarm settings, trigger settings, and data in resistance preference unit instead of temperature preference unit -Pressing the + or - key on the number row of the keyboard should no longer toggle RF2000A alarms while editing alarm settings -Corrected displayed environment range for RFTemp2000A -Corrected Australian time zone spelling -Fixed Time Zone column data not copying properly from grid reports -Fixed wireless devices sometimes being removed from the device list even after being plugged in -Fixed device reset failing while the device is running -Fixed OctProcess and OctVolt not calibrating properly -Fixed pH not appearing as a conversion unit when viewing pH data -Alarm and trigger settings are now rounded according to channel resolution rather than always two digits -Fixed thermocouple preference unit sometimes being ignored -Fixed thermocouple channel calibration when using high/low values -Fixed displayed realtime data sometimes not updating -Fixed conversion units derived from engineering units not being listed -Fixed page range not being selectable in the print dialog when printing from a print preview -Fixed occasional crashing when closing the software and layout settings are being saved -Fixed crashing when the system Region and Language format is set to Saudi Arabia -Fixed crashing when selecting a device type to use in an alarm rule and entering a serial number in an invalid format -Fixed crashing when zooming out of a grid report too far -Fixed crashing when dragging a folder to the recycle bin -Other minor fixes ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.4.0 April 26, 2013 ------------------------------------------------------------------------ Updated visuals ------------------------------------------------------------------------ MadgeTech 4 Secure v4.1.3.0 April 9, 2013 ------------------------------------------------------------------------ Initial release