- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The QuadState is a four channel, battery powered, stand alone state change data logger. The device records time and date stamped, ON and OFF state changes for equipment run-time, usage and event duration data. It can be used with dry contact relay switches or analog voltage input signals to determine changes in status and open/closed contacts.
This is an all-in-one compact, portable, easy to use device that will measure and record data for up to 52,428 state changes. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The QuadState makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
The QuadState is available with an extended warranty.
This is an all-in-one compact, portable, easy to use device that will measure and record data for up to 52,428 state changes. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The QuadState makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
The QuadState is available with an extended warranty.
STATE
| State Input Range | 0~12 VDC continuous; 0~30 VCD peak |
|---|---|
| State Input Low | <0.4V |
| State Input High | >2.7V |
| State Internal Weak Pull-up | <500μA |
| Recommended Duty Cycle for Inputs Greater than 12VDC (over 1 minute interval) | 18V:<50%,24V:<25%,30V:<10% |
| State Resolution | 1 second |
GENERAL
| Memory | 52,428 states |
|---|---|
| Reading Rate | 1 second up to 12 hours |
| Baud Rate | 2,400 |
| Channels | 4 |
| LED Indicators | None |
| Battery Life | 1 year |
| Material | Anodized aluminum |
| Dimensions | 3.5" x 4.4" x 1.0" (89mm x 112mm x 26mm) |
| Operating Environment | -20~+60°C, 0~95%RH non-condensing |
| Required Interface Package | IFC110 or IFC200 |
Product Applications
Accessories
Required Accessories
Check items to add to the cart or select all
-
USB Interface cable package for Standard Series Data Loggers.
Specifications Sheet | Compatibility Guide
Knowledge Base
Optional Accessories
-
Split core current relay switch, monitors 1.25-50Amps, adjustable set point between 1.25-50Amps, status LED's.
Knowledge Base
-
Split core current switch, mointors 1.5-150Amps. Adjustable set point and status LED's.
Knowledge Base
-
Solid core current switch, monitors 1-250Amps, sensor trips at 1Amp. Switch can be used for both AC and DC circuits.
Knowledge Base
-
-
Split core current relay switch, monitors 0.15 to 200Amps, fixed setpoints at 0.15Amps max, no status LED's.
Knowledge Base
-
Split Core current switch, monitors 1.5-250Amps, sensor trips at 1.5Amps. Switch can be used for both AC and DC circuits.
Knowledge Base
-
RS232 (Serial) Interface cable package for Standard Series Data Loggers.
Interface Cables Compatibility Guide | Knowledge Base
Click and Drag to Rotate