Made in the USA

Skip to Main Content »

Motor101A Data Logging System

Motor101A, Power Cycle Data Logging System. Includes data logger, current switch and IFC200 interface cable.

Availability: 5-7 Business Days

$249.00
$249.00
The Motor101A measures and records on and off status changes for motors or other equipment drawing up to 200 Amps. The state change occurs when the current switch exceeds the 150 mA set point. This allows for most basic equipment to be monitored.

The current switch monitors whether there is current passing through a wire around which it is clamped. When the current exceeds 150 mA’s, the output changes and provides a voltage for the Motor101A to measure. The device can hold up to 406,323 state changes, but memory will only be used if the status has changed. The device can be programmed to check for status changes 4 times per second up to once every 24 hours.

The Motor101A includes a data logger, current switch and an IFC200 interface cable.


STATE

State Resolution 1 second (reading rate dependent)
Amperage Range 0.15 to 200 Amps
Trip Point 0.15 A (150 mA) fixed (200 mA AC for 50 Hz operation)
Status Output N.O.1.0 A at 30 VAC/DC
Housing Split Core

GENERAL

Memory 406,323 states
Reading Rate 4 Hz to 1 every 24 hours
Baud Rate 115,200
LED Indicators Red and Green
Push-Button Start Yes
Battery Life 10 years typical
Material ABS Plastic
Dimensions Data Logger: 1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm)
Current Switch: 2.1 in x 3.5 in x 1.0 in (54 mm x 89 mm x 16 mm)
Operating Environment -15 °C to +40 °C (+5 °F to +104 °F), 10 %RH to 90 %RH non-condensing
Required Interface Package IFC200
Approvals CE

1 Item(s)

per page
  1. Motor101A Data Logging System Review by Duncan White

    Compact data logger, ideal for production use. Simple to use & easy to install. Visual software user friendly. (Posted on 4/23/12)

1 Item(s)

per page