Made in the USA

Skip to Main Content »

Knowledge Base

Articles of "Interface Cables"

Descending
Article Rating Date

How long can I make the cable on the IFC200/IFC110?

How long can I make the cable on the IFC200/IFC110? To ensure accurate communication, it is not recommended that the 3.5mm pin cable be lengthened. On the IFC200, the USB cable may be replaced w...

Tags: ifc110 ifc200

1/18/12

How long can I make the USB cable on the RFC1000/IFC300/IFC400?

How long can I make the USB cable on the RFC1000/IFC300/IFC400? These MadgeTech interface devices have been tested and guaranteed with the supplied five foot USB cables. They may be replaced lon...

Tags: ifc300 ifc400 rfc1000

1/18/12

What are the small white switches on my RFC1000 and on my wireless data loggers?

What are the small white switches on my RFC1000 and on my wireless data loggers? There are dip switches on RFC1000s, RFOTs, and all models of Therm-A-Lerts. There are four switches together labe...

Tags: rfc1000 rfot thermalert wireless

2/28/12

The software says that it is "unable to find an active device!".

The software says that it is "unable to find an active device!". This is a generic error that indicates the software was unable to connect to a data logger. This could be due to a number of dif...

Tags: unable-to-find-device

2/28/12

The USB Driver Installer Won’t Run

The USB Driver Installer Won’t Run The following applies to the IFC200, IFC202, IFC300, IFC400, and RFC1000. Typically the correct method of installing the USB drivers is to run the USB...

Tags: drivers ifc200 ifc202 ifc300 ifc400 interface cables rfc1000

12/7/12

Items 11 to 15 of 15 total

Page:
  1. 1
  2. 2