Made in the USA

Skip to Main Content »

Knowledge Base

Articles of "Interface Cables"

Ascending
Article Rating Date

Channel changes on RFC1000, RFOT, Therm-A-lert loggers

There are dip switches on the RFC1000s, RFOTs, and all models of Therm-A-lerts. There are four switches together labeled 1, 2, 3, and 4. These dip switches are what you use to configure the wireless c...

Tags: rfc1000 rfot thermalert wireless

11/7/17

How do I choose the right interface cable?

Certain interface cables will only operate with specific data loggers. The following information will help with determining the correct interface cable for your MadgeTech data logger. Quick Referen...

Tags: ifc102 ifc103 ifc110 ifc200 ifc202 ifc300 ifc400 interface cables rfc1000 rfc101a rfc200a

11/7/17

Which interface cable do I need?

To choose the correct interface cable, please refer to the Interface Cable compatibility chart.

Tags: ifc200 ifc202 ifc300 ifc400 interface cables rfc1000

11/7/17

IFC200/IFC202/IFC300/IFC400 Troubleshooting

I'm having trouble with my Interface cable (IFC200, IFC202, IFC300, IFC400). MadgeTech 4: Please follow the steps below to install the USB drivers: Your interface cable (for example, IFC200, IF...

Tags: ifc200 ifc202 ifc300 interface cable troubleshooting interface faqs

11/7/17

The "PreInstaller.exe" USB Driver Installer Won't Run - How to install drivers manually

The following applies to the IFC200, IFC202, IFC300, IFC400, and RFC1000. The standard method of installing the USB drivers is to run the "PreInstaller.exe" USB driver installation utility before plu...

Tags: driver drivers ifc ifc200 ifc202 ifc300 ifc400 interface cables manual install preinstaller preinstaller.exe rfc1000 usb

11/2/17

Data Loggers Don't Appear in Software

The software displays "No devices are connected. Why are my devices not appearing?" - MadgeTech 4 The software displays "Unable to find an active device!" - MadgeTech 2 This generic error oc...

Tags: no-devices-are-connected unable-to-connect unable-to-find-device

11/2/17

How long can I make the USB cable on the RFC1000/IFC300/IFC400?

How long can I make the USB cable on the RFC1000/IFC300/IFC400? These MadgeTech interface devices have been tested and guaranteed with the supplied five foot USB cables. They may be replaced lon...

Tags: ifc300 ifc400 rfc1000

1/18/12

How long can I make the cable on the IFC200/IFC110?

How long can I make the cable on the IFC200/IFC110? To ensure accurate communication, it is not recommended that the 3.5mm pin cable be lengthened. On the IFC200, the USB cable may be replaced w...

Tags: ifc110 ifc200

1/18/12

Checking for and updating USB Driver Installation Files

How do I Check for and Update the USB Driver Installation Files? To Update the USB Driver Installation Files: 1. Go to http://www.madgetech.com/software-download   2. Scroll down the p...

Tags: ifc200 ifc300 ifc400

1/18/12

IFC110 not Communicating with Software

I have recently purchased a data logger and am having issues communicating with it from my computer via the RS232 PC interface cable (IFC110). If your IFC110 isn't working, make sure you know wh...

Tags: communicating ifc110 ifc110 not working ifc110 troubleshooting interface cable no communication rs232

1/13/12

Items 1 to 10 of 13 total

Page:
  1. 1
  2. 2