Made in the USA

Skip to Main Content »

Knowledge Base

Articles of "Data Loggers"

Descending
Article Rating Date

Recovering Calibration Parameters

Please contact support@madgetech.com to obtain original calibration values. MadgeTech can provide values for calibrations completed by Madgetech. 

Tags: calibration

2/16/18

Downloading Data

Madgetech 4: Downloading data from a data logger 1. Connect the logger to the interface cable. 2. Highlight the data logger in the Connected Devices panel. 3. Click Stop. 4. Click Download....

Tags: getting started

2/16/18

Wind101A Data Logger Installation Tips

When installing the Wind101A, refer to the following: - Mount the anemometer vertically in an open area, as high as possible, preferably on a pole.- Mount the anemometer using a cotter pin on a 0.5...

Tags: wind101a

2/16/18

101A Series LED's

The green LED blinks every 10 seconds to indicate the data logger is running. The green LED blinks every 15 seconds to indicate the device is in delayed start mode, or waiting to start. The red LED...

Tags: 101a series

2/16/18

2000A Series LED's

The green LED will blink once every 5 seconds to indicate a delayed start or waiting to start. The green LED blinks once every 15 seconds to indicate the data logger is recording.The red LED flashes t...

Tags: 2000 series

2/16/18

Items 41 to 45 of 45 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5