Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The RFRTDTemp101A is an RTD temperature probe based data logger with built-in, wireless (RF) transmitter. It is Ideal for monitoring temperature data in a wide variety of applications, where high accuracy is required. The RFRTDTemp101A can transmit data up to 120 feet, line of sight, when used with the RFC101A receiver. Built-in memory also stores data internally. An external RTD probe is required (not included).
The RFRTDTemp101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
The RFRTDTemp101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
TEMPERATURE
| Remote Channel Temperature Sensor | External RTD 2,3 or 4 wire 100 Ohm Platinum RTD |
|---|---|
| Remote Channel Temperature Range | -200~+850°C |
| Remote Channel Temperature Resolution | 0.01°C |
| Remote Channel Temperature Calibrated Accuracy | ±0.1°C |
WIRELESS
| RF Carrier Frequency | 418 ±0.075MHz |
|---|---|
| RF Baud Rate | 4800 |
| Output Power | <0dBm typical (<1mW) |
| Receiver Sensitivity (RFC101A) | -90dBm typical |
| Typical outdoors Line of sight | Up to 120' (36m) |
| Typical Indoors line of sight | Up to 40' (12m) |
GENERAL
| Memory | 5,461 readings |
|---|---|
| Reading Rate | 30 seconds up to 12 hours |
| Baud Rate | 57,600 |
| LED Indicators | Red & Green |
| Battery Life | 1 year |
| Material | ABS plastic |
| Dimensions | 1.7" x 2.3" x 0.8" plus 2.0" antenna (44mm x 59mm x 21mm + 51mm antenna) |
| Operating Environment | -30~+70°C; 0~95%RH non-condensing |
| Required Interface Package | RFC101A or RFC200A |
| Approvals | US(FCC), CA(IC) |
Accessories
Required Accessories
Check items to add to the cart or select all
-
Radio frequency receiver for Standard RF Series Data Loggers. Includes Wireless Receiver, MadgeTech Software CD, Software Manual, Power Supply, IFC200, and Serial to USB Convertor (For RF Receiver).
Knowledge Base
Optional Accessories
-
3.6 Volt, Lithium Battery, 750 mAH
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
3.6 Volt, Lithium Battery, 750 mAH (pack of 14)
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath.
Knowledge Base
-
-
-
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Knowledge Base
