Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The ETR101A is a complete Exhaust Temperature Profiling Kit designed to profile the exhaust temperature of on-road vehicles and off-road equipment, including tractor trailers, buses, trucks over 14,000 lbs., waste water vehicles, and sweepers. The ETR101A kit comes assembled and includes a data logger, temperature sensor (thermocouple type K), weatherproof enclosure, USB data logger interface cable (IFC200), hex screwdriver and software.
Setup is fast and easy. The data logger, which is contained within the water resistant enclosure, is mounted to the vehicle. Using the MadgeTech software, the logger is programmed to record for a set period, generally three to five days. Data is stored in the data logger, and is downloadable at any time via a pc or laptop computer. The complete temperature profile is then provided to the diesel particulate filter (DPF) manufacturer, aiding in the selection of the correct DPF for the exhaust system. Many DPF manufacturers, including Donaldson Corp., recommend the use of temperature profiling equipment, such as the MadgeTech ETR101A, to aid in the selection of the appropriate diesel particulate filter.
The ETR110 is available with an extended warranty.
Setup is fast and easy. The data logger, which is contained within the water resistant enclosure, is mounted to the vehicle. Using the MadgeTech software, the logger is programmed to record for a set period, generally three to five days. Data is stored in the data logger, and is downloadable at any time via a pc or laptop computer. The complete temperature profile is then provided to the diesel particulate filter (DPF) manufacturer, aiding in the selection of the correct DPF for the exhaust system. Many DPF manufacturers, including Donaldson Corp., recommend the use of temperature profiling equipment, such as the MadgeTech ETR101A, to aid in the selection of the appropriate diesel particulate filter.
The ETR110 is available with an extended warranty.
TEMPERATURE
| Temperature Sensor | Semiconductor |
|---|---|
| Temperature Range | -40°C to +80°C (-40°F to +176°F) |
| Temperature Resolution | 0.1°C (0.18°F) |
| Temperature Calibrated Accuracy | ±0.25°C (±0.45°F) |
| Remote Channel Temperature Sensor | Thermocouple Type K |
| Remote Channel Temperature Range | -260°C to +1070°C |
| Remote Channel Temperature Resolution | 0.1°C |
| Remote Channel Temperature Calibrated Accuracy | ±0.5°C |
GENERAL
| Memory | 500,000 readings; software configurable memory wrap 250,000 readings in multiple start/stop mode |
|---|---|
| Reading Rate | 1 second up to 24 hours |
| Baud Rate | 115,200 |
| Cold Junction Compensation | Automatic |
| Channels | 1 Internal & 1 Remote |
| LED Indicators | Red and Green |
| Push-Button Start | Yes |
| Battery Life | 10 years typical, dependent upon frequency and duty cycle |
| Material | ABS plastic |
| Dimensions | 1.4" x 2.2" x 0.6” (36mm x 56mm x 16mm) |
| Operating Environment | -20°C to 80°C, 0 to 100%RH |
| Required Interface Package | IFC200 |
Accessories
Required Accessories
Check items to add to the cart or select all
-
USB Interface cable package for Standard Series Data Loggers.
Specifications Sheet | Compatibility Guide
Knowledge Base
Optional Accessories
-
3.6 Volt, Lithium Battery, 750 mAH
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
One set of replacement o-rings for the Waterbox101A.
O-Rings101 | Knowledge Base
-
The Tibbo DS203R allows MadgeTech Data Loggers to be accessed over a network. This allows for a logger to be placed in remote locations and maintain communications to control and/or monitor the device by creating a serial tunnel (virtual RS232 connection). The DS202R is a simple, yet powerful device, that is useful in many applications where a typical serial device may be used. The Tibbo DS203R is intended for use within network communications, making it quite useful for remote data logging. One Tibbo DS203R can effectively network-enable a single data logger.
Knowledge Base
-
Type K Thermocouple with 6" x 1/8" dia. Stainless Steel Sheath and 3’ of lead wire. Replacement Thermocouple for ETR101A.
Knowledge Base
-
3.6 Volt, Lithium Battery, 750 mAH (pack of 14)
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
1 Item(s)
per page
-
Easy to Program and Download Review by Cummins Cal Pacific
Our users love how easy the software is to program, download, and read the data. The logger and water box is 19 times smaller than the logger and water proof box we were using before. We can now install the logger in more areas with less hassle which adds to our efficiency. (Posted on 1/6/12)
1 Item(s)
per page