Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The RFPulse101A is pulse counter and totalizer data logger with built-in, wireless (RF) transmitter. Using the RFC101A receiver, the RFTemp101A can transmit data up to 120 feet, line of sight. Built-in memory also stores data internally. Can be used with dry contact switches and relays or analog voltage input signals from external devices (i.e. pulse initiators, pulse output transducers, totalizers, counters, flow meters etc.). Features user-programmable Engineering Units and fast data sampling rate.
The RFPulse101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
The RFPulse101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
PULSE
| Maximum Pulse Rate | 100 Hz |
|---|---|
| Pulse Input Range | 0~12V continuous (0~30V peak) |
| Pulse Input Low | <0.4V |
| Pulse Input High | >2.7V |
| Pulse Internal Weak Pull-up | <500μA |
| Minimum Input Active | 4 milliseconds |
| Input Impedance | >1k |
WIRELESS
| RF Carrier Frequency | 418 ±0.075MHz |
|---|---|
| RF Baud Rate | 4,800 |
| Receiver Sensitivity (RFC101A) | -90dBm typical |
| Typical outdoors Line of sight | Up to 120' (36m) |
| Typical Indoors line of sight | Up to 40' (12m) |
GENERAL
| Memory | 4,095 |
|---|---|
| Reading Rate | 30 seconds up to 12 hours |
| Battery Life | 15 minutes up to 5 years |
| Material | ABS plastic |
| Dimensions | 2.7" x 1.6" x 0.8", with 2.0" whip antenna (68mm x 41mm x 20mm, 51mm whip antenna) |
| Operating Environment | -30 to 70°C, 0 to 95%RH non-condensing |
| Required Interface Package | RFC101A or RFC200A |
| Approvals | US(FCC), CA(IC) |
Accessories
Required Accessories
Check items to add to the cart or select all
-
Radio frequency receiver for Standard RF Series Data Loggers. Includes Wireless Receiver, MadgeTech Software CD, Software Manual, Power Supply, IFC200, and Serial to USB Convertor (For RF Receiver).
Knowledge Base
Optional Accessories
-
3.6 Volt, Lithium Battery, 750 mAH
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
3.6 Volt, Lithium Battery, 750 mAH (pack of 14)
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Knowledge Base
-
Radio Frequency Receiver for Standard RF Series Data Loggers. AC power required, RS232 Connection.
Knowledge Base
-
-
