Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The Bridge120 is a battery powered, miniature, stand alone bridge/strain data logger. The device features a 20Hz processing speed and a real-time clock module. The Bridge120 supplies a 2.5V excitation voltage and accepts voltage signals from strain gauges, load cells and other low-level, DC voltage sources. The data logger is perfect for monitoring stress, torque, strain, pressure conditions and data from many other sensors/transducers. User programmable Engineering Units allow the data to be presented in Volts, milliVolts, microVolts as well as the proper units being measured. This easy-to-use device can measure and record data for up to 32,767 measurements per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The Bridge120 data logger makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
The Bridge120 is available with an extended warranty.
The Bridge120 is available with an extended warranty.
BRIDGE
| Bridge Range | ±10mV ±25mV ±100mV ±1000mV |
|---|---|
| Bridge Resolution | ±10mV: 1μV ±25mV: 2.5μV ±100mV: 5μV ±1000mV: 50μV |
| Bridge Accuracy | ±10mV: ±0.25%FSR ±25mV: ±0.10%FSR ±100mV: ±0.05%FSR ±1000mV: ±0.01%FSR |
GENERAL
| Memory | 32,767 |
|---|---|
| Reading Rate | 20Hz up to 12 hours |
| Baud Rate | 57,600 |
| Battery Life | 25 days |
| Material | ABS Plastic |
| Dimensions | 1.7" x 2.7" x 0.8" (44mm x 69mm x 21mm) |
| Operating Environment | -40~+80°C, 0~95%RH non-condensing |
| Required Interface Package | IFC110 or IFC200 |
| Approvals | CE |
Product Tables
| Nominal Range | ±10 | ±25 | ±100 | ±1000 |
|---|---|---|---|---|
| Measurement Range | ±15mV | ±37.5mV | ±150mV | ±1200mV |
| Resolution | 1μV | 2.5μV | 5μV | 50μV |
| Calibrated Accuracy at 25°C | ±.25% FSR | ±.10% FSR | ±.05% FSR | ±.01% FSR |
| Input Range | 0 to 2.5V | |||
| Reference Voltage | 2.5V | |||
Accessories
Required Accessories
Check items to add to the cart or select all
-
USB Interface cable package for Standard Series Data Loggers.
Specifications Sheet | Compatibility Guide
Knowledge Base
Optional Accessories
-
3.6 Volt, Lithium Battery, 750 mAH
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
3.6 Volt, Lithium Battery, 750 mAH (pack of 14)
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Knowledge Base
-
RS232 (Serial) Interface cable package for Standard Series Data Loggers.
Interface Cables Compatibility Guide | Knowledge Base
-
-
Water Resistant Enclosure with Cable Gland for use with the 110 Series Data Loggers.
Knowledge Base
-
