- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The MadgeTech Therm•A•Lert-RH is a humidity and temperature monitoring and alarming system, designed specifically for laboratories, warehouses and other environments where temperature and humidity monitoring is critical. The system can be used to monitor a single location, or expanded to monitor hundreds of locations over a broad area (additional MadgeTech wireless loggers and transceivers may be required).
The Therm•A•Lert-RH provides real time wireless, or wired, notification of humidity and temperature. The data logger features user programmable alarms that can be configured to send a message via text message (standard SMS rates apply), on-screen alarm and/or via e-mail if an alarm condition is met.
The Therm•A•Lert-RH device is equipped with two-way wireless communication. MadgeTech wireless systems offer a flexible and robust integration for many applications. One PC can provide control and communication to all the wireless loggers within range, or the system can be divided into smaller subnets (using a different RF channel). In addition to the data being transmitted wirelessly, the Therm•A•Lert-RH also stores each reading to non-volatile internal memory for a secure backup. Customers can also set up automatic archiving preferences, ensuring all data is saved and retained to comply with federal regulations.
The Therm-A-lert-RH is available with an extended warranty.
The Therm•A•Lert-RH provides real time wireless, or wired, notification of humidity and temperature. The data logger features user programmable alarms that can be configured to send a message via text message (standard SMS rates apply), on-screen alarm and/or via e-mail if an alarm condition is met.
The Therm•A•Lert-RH device is equipped with two-way wireless communication. MadgeTech wireless systems offer a flexible and robust integration for many applications. One PC can provide control and communication to all the wireless loggers within range, or the system can be divided into smaller subnets (using a different RF channel). In addition to the data being transmitted wirelessly, the Therm•A•Lert-RH also stores each reading to non-volatile internal memory for a secure backup. Customers can also set up automatic archiving preferences, ensuring all data is saved and retained to comply with federal regulations.
The Therm-A-lert-RH is available with an extended warranty.
TEMPERATURE
| Temperature Sensor | Semiconductor |
|---|---|
| Temperature Range | -20°C to +80°C (-4°F to +176°F) |
| Temperature Resolution | 0.01°C |
| Temperature Calibrated Accuracy | ±0.5°C (0°C to +50°C) |
HUMIDITY
| Humidity Sensor | Semiconductor |
|---|---|
| Humidity Range | 0%RH to 95%RH noncondensing |
| Humidity Resolution | 0.1%RH |
| Humidity Calibrated Accuracy | ±3.0%RH (±2%RH typical at 25°C/77°F) |
WIRELESS
| RF Carrier Frequency | 2.45GHz IEEE 802.15.4 ultra-low power MadgeNET wireless transceiver with fully bi-directional communication |
|---|---|
| Output Power | +0dBm typical |
| Receiver Sensitivity (RFC101A) | -95dBm typical (RFC1000) |
| Typical outdoors Line of sight | Up to 400' |
| Typical Indoors line of sight | Up to 150' |
GENERAL
| Memory | 15,000 readings per channel |
|---|---|
| Reading Rate | 1 reading every 2 seconds to 1 every 24 hours |
| Battery Life | 2 years Typical |
| Material | ABS Plastic |
| Dimensions | 2.2” x 5.25” x 1.3” (55mm x 133mm x 33mm) |
| Operating Environment | -20°C to +80°C (-4°F to 176°F), 0%RH to 95%RH non-condensing |
| Required Interface Package | RFC1000 |
| Approvals | US(FCC), CA(IC), CE |
Accessories
Required Accessories
Check items to add to the cart or select all
Optional Accessories
-
-
Wireless RF Receiver and Repeater for the RFOT and Therm-A-Lert Data Loggers. Increases signal strength over long distances for wireless systems. Includes AC Power Supply and RFC1000.
Knowledge Base
-
Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers.
Knowledge Base
