- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The PRTemp1000IS is a rugged pressure and temperature data logger. It measure and records temperature and pressure data at user defined intervals. The PRTemp1000IS has been Factory Mutual certified as intrinsically safe for Class I, Division 1, groups A, B, C and D and non-incendive for Class I, Division 2, groups A, B, C and D. This certification makes the device ideal for uses in hostile environment applications such as air conditioning systems, chilled water, hot water, air, gas, oil and steam pressure systems. The internal temperature sensor provides accurate temperature measurements without the need of a separate temperature data logger. The logger can be started to take measurements as often as every two seconds, up to one reading every twelve hours. It will store up to 16,383 readings in its non-volatile memory. The PRTemp1000IS uses a rugged stainless steel pressure strain gauge to accurately measure the pressure. The device comes standard with a common 1/4” NPT fitting, which allows the logger to be adapted to almost any pressure fitting. There are many different pressure ranges available to suit most any application. The standard pressure ranges are 30 PSIA(G), 100 PSIA(G), 300 PSIA(G), 500 PSIA(G), 1000 PSIA and 5000 PSIA.
The PRTemp1000IS is available with an extended warranty.
The PRTemp1000IS is available with an extended warranty.
TEMPERATURE
| Temperature Sensor | Internal semiconductor |
|---|---|
| Temperature Range | -40 to +80°C |
| Temperature Resolution | 0.1°C |
| Temperature Calibrated Accuracy | ±0.5°C |
PRESSURE
| Pressure Sensor | Semiconductor (strain gauge) |
|---|---|
| Pressure Range | 0 to 30, 100, 300, 500 PSIA/G; 0 to 1000 or 5000 PSIA |
| Pressure Resolution | See Specifications Sheet |
| Pressure Calibrated Accuracy | 2% FSR, 0.25% at 25°C typical |
GENERAL
| Memory | 16,383/channel |
|---|---|
| Reading Rate | 2 seconds up to 12 hours |
| Baud Rate | 2,400 |
| Battery Life | 1 year |
| Material | 303 stainless steel |
| Dimensions | 6.4" x 1.25" dia. (163mm x 32mm) |
| Submersible | Yes |
| Operating Environment | -40~+80°C, 0~100%RH |
| Required Interface Package | IFC110 or IFC200 |
| Approvals | CE, IS rated |
Product Tables
| Range (PSI) | 0-30 | 0-100 | 0-200 | 0-300 | 0-500 | 0-1000 | 0-5000 |
|---|---|---|---|---|---|---|---|
| Accuracy | 2% FSR, 0.25% @ 25°C Typical | ||||||
| Resolution (PSI) | 0.002 | 0.005 | 0.01 | 0.02 | 0.05 | 0.05 | 0.2 |
Accessories
Required Accessories
Check items to add to the cart or select all
-
USB Interface cable package for Standard Series Data Loggers.
Specifications Sheet | Compatibility Guide
Knowledge Base
Optional Accessories
-
MadgeTech 4 Secure Validation Package
IQ/OQ/PQ Secure software validation work book and software package.
Secure Software Features
Compatibility List
Specification Sheet
Requirement Checklist
IQ/OQ/PQ On-Site Service
Knowledge Base -
RS232 (Serial) Interface cable package for Standard Series Data Loggers.
Interface Cables Compatibility Guide | Knowledge Base
-
Magnetic holder for use with the PR140, HiTemp140 series and 1000 series data loggers.
Dimensional Drawing | Knowledge Base
-
The DS203R from Tibbo can be used in conjunction with an IFC110 to network enable a MadgeTech data logger. This is done by using Tibbo software to create a virtual RS232 serial connection.
Check Product Description for compatibility information.
Knowledge Base
-
Click and Drag to Rotate
1 Item(s)
per page
-
Data Loggers Pays for Themselves Review by Natural Gas Gathering Company
We use the pressure recorders to perform pressure surveys on sections of line. We'll place the recorders at intervals along a given given pipeline, the data is then used to see where we might be loosing gas due to a leak or other anomaly. Our system is aging and we have a lot of leaks. These transmitters pay for themselves on the first job they are used on, by pinpointing problem areas and reducing the time it takes to identify the problem. (Posted on 1/10/12)
1 Item(s)
per page
|
|
|
|
