- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The MadgeTech Therm•A•Lert-P is a temperature monitoring and alarming system, designed specifically for laboratories, warehouses and other environments where temperature monitoring is critical. The system can be used to monitor a single location, or expanded to monitor hundreds of locations over a broad area (additional MadgeTech wireless loggers and transceivers may be required).
The Therm•A•Lert-P provides real time wireless, or wired, notification of temperature. The data logger features user programmable alarms that can be configured to send a message via text message (standard SMS rates apply), on-screen alarm and/or via e-mail if an alarm condition is met. The standard Therm•A•Lert-P includes an RTD probe with a 9’ lead wire and a 4.5” probe sheath.
The Therm•A•Lert-P device is equipped with two-way wireless communication. MadgeTech wireless systems offer a flexible and robust integration for many applications. One PC can provide control and communication to all the wireless loggers within range, or the system can be divided into smaller subnets (using a different RF channel). In addition to the data being transmitted wirelessly, the Therm•A•Lert-P also stores each reading to non-volatile internal memory for a secure backup. Customers can set up automatic archiving preferences, ensuring all data is saved and retained to comply with federal regulations.
The Therm•A•Lert-P probe can be mounted inside an ethylene glycol bottle. When placed in a chamber, the temperature of the ethylene glycol is measured rather than air temperature. This more accurately represents the temperature of the contents inside the chamber, and prevents false alarm triggers when the chamber door is opened and closed. The glycol bottles are available in 30ml, 60ml and 250ml sizes.
The Therm-A-lert-P is available with an extended warranty.
The Therm•A•Lert-P provides real time wireless, or wired, notification of temperature. The data logger features user programmable alarms that can be configured to send a message via text message (standard SMS rates apply), on-screen alarm and/or via e-mail if an alarm condition is met. The standard Therm•A•Lert-P includes an RTD probe with a 9’ lead wire and a 4.5” probe sheath.
The Therm•A•Lert-P device is equipped with two-way wireless communication. MadgeTech wireless systems offer a flexible and robust integration for many applications. One PC can provide control and communication to all the wireless loggers within range, or the system can be divided into smaller subnets (using a different RF channel). In addition to the data being transmitted wirelessly, the Therm•A•Lert-P also stores each reading to non-volatile internal memory for a secure backup. Customers can set up automatic archiving preferences, ensuring all data is saved and retained to comply with federal regulations.
The Therm•A•Lert-P probe can be mounted inside an ethylene glycol bottle. When placed in a chamber, the temperature of the ethylene glycol is measured rather than air temperature. This more accurately represents the temperature of the contents inside the chamber, and prevents false alarm triggers when the chamber door is opened and closed. The glycol bottles are available in 30ml, 60ml and 250ml sizes.
The Therm-A-lert-P is available with an extended warranty.
TEMPERATURE
| Remote Channel Temperature Range | -200°C to +260°C (--328°F to +500°F) |
|---|---|
| Remote Channel Temperature Resolution | 0.01°C |
| Remote Channel Temperature Calibrated Accuracy | ±0.1°C (-20°C to +80°C) ±0.5°C (outside of that range) |
WIRELESS
| RF Carrier Frequency | 2.45GHz IEEE 802.15.4 ultra-low power MadgeNET wireless transceiver with fully bi-directional communication |
|---|---|
| Output Power | +0dBm typical |
| Receiver Sensitivity (RFC101A) | -95dBm typical (RFC1000) |
| Typical outdoors Line of sight | Up to 400' |
| Typical Indoors line of sight | Up to 150' |
GENERAL
| Memory | 30,000 readings |
|---|---|
| Reading Rate | 1 reading every 2 seconds to 1 every 24 hours |
| Battery Life | 2 years Typical |
| Material | ABS Plastic |
| Operating Environment | -20°C to +80°C (-4°F to 176°F), 0%RH to 95%RH non-condensing Lead Wire: -200°C to +200°C |
| Required Interface Package | RFC1000 |
| Approvals | US(FCC), CA(IC), CE |
Accessories
Required Accessories
Check items to add to the cart or select all
Optional Accessories
-
-
-
Wireless RF Receiver and Repeater for the RFOT and Therm-A-Lert Data Loggers. Increases signal strength over long distances for wireless systems. Includes AC Power Supply and RFC1000.
Knowledge Base
-
Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers.
Knowledge Base
1 Item(s)
per page
-
Data Loggers Allow for Continuous Monitoring Review by Candy Company
The current use of the MadgeTech temperature units we use is to maintain temperature on all our incubators, refrigerators, ultra freezers, water baths and hot boxes thus ensuring that the appropriate temperatures are maintain during the testing period of our confectionary products. The systems offer us continuous monitoring and the program ensures that the testing that is done is done in accordance with federal standards. The systems we currently use monitor temperatures from -40 C to 100 C, this variety ensures that all our applications are met. Our previous processes did not allow for continuous monitoring which in today’s food conscious environment is an essential part of consumer food safety. In
addition to the above description of the applications the technical support from MadgeTech goes above and beyond other small units we have used in the past. (Posted on 1/6/12)
1 Item(s)
per page