Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The RFpHTemp101A is a battery powered pH and RTD based temperature data logger with a wireless transmitter. The device measures full range from 0 to 14pH. The data logger directly connects to industry standard pH and ORP probes with female BNC connectors. Temperature compensation is provided through an external RTD temperature channel.
This is an all-in-one compact, portable, easy to use device that will measure and record data for up to 13,107 measurements per channel. The RFpHTemp101A combines the features from the standard product line and adds the convenience of a wireless transmitter. Using the RFC101A receiver, the RFTemp101A can transmit data up to 120 feet, line of sight. When enabled, the wireless transmitter will transmit readings back to the host computer where the data can be analyzed in real time. Built-in memory also stores data internally. The convenient slide switch allows the transmitter to be turned on or off without affecting the operation of the device.
The device can be started, stopped and configured directly from your computer. Its small size allows it to fit almost anywhere. In addition to the wireless communications, the RFpHTemp101A makes data retrieval quick and easy. Simply plug the device into an empty COM port and our user-friendly software will handle the rest.
The RFpHTemp101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
This is an all-in-one compact, portable, easy to use device that will measure and record data for up to 13,107 measurements per channel. The RFpHTemp101A combines the features from the standard product line and adds the convenience of a wireless transmitter. Using the RFC101A receiver, the RFTemp101A can transmit data up to 120 feet, line of sight. When enabled, the wireless transmitter will transmit readings back to the host computer where the data can be analyzed in real time. Built-in memory also stores data internally. The convenient slide switch allows the transmitter to be turned on or off without affecting the operation of the device.
The device can be started, stopped and configured directly from your computer. Its small size allows it to fit almost anywhere. In addition to the wireless communications, the RFpHTemp101A makes data retrieval quick and easy. Simply plug the device into an empty COM port and our user-friendly software will handle the rest.
The RFpHTemp101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
TEMPERATURE
| Remote Channel Temperature Sensor | 2, 3 or 4 wire 100 Ohm Platinum RTD |
|---|---|
| Remote Channel Temperature Range | -40~+125°C |
| Remote Channel Temperature Resolution | 0.01°C |
| Remote Channel Temperature Calibrated Accuracy | ±0.1°C at 25°C |
pH
| pH Range | 0~14pH |
|---|---|
| pH Resolution | 0.01pH |
| pH Accuracy | ±0.1pH |
WIRELESS
| RF Carrier Frequency | 418 ±0.075MHz |
|---|---|
| RF Baud Rate | 4800 |
| Output Power | <0dBm typical (<1mW) |
| Receiver Sensitivity (RFC101A) | -90dBm typical |
| Typical outdoors Line of sight | Up to 120' (36m) |
| Typical Indoors line of sight | Up to 40' (12m) |
GENERAL
| Memory | 13,107 readings per channel |
|---|---|
| Reading Rate | 30 seconds up to 12 hours |
| Baud Rate | 57,600 |
| LED Indicators | Red & Green |
| Battery Life | 1 year |
| Material | ABS plastic |
| Dimensions | 4.5" x 2.4" x 1.0" plus 2.0" antenna (114mm x 61mm x 26mm + 51mm antenna) |
| Operating Environment | -5~+50°C 0~95%RH non-condensing |
| Required Interface Package | RFC101A or RFC200A |
| Approvals | US(FCC), CA(IC) |
Accessories
Required Accessories
Check items to add to the cart or select all
-
Radio frequency receiver for Standard RF Series Data Loggers. Includes Wireless Receiver, MadgeTech Software CD, Software Manual, Power Supply, IFC200, and Serial to USB Convertor (For RF Receiver).
Knowledge Base
-
General Purpose pH probe for use with the pHTemp101. Features standard BNC connector. Clear, epoxy-bodied, gel-filled combination electrode measures the entire 0 to 14pH range. Soaker storage bottle included.
Knowledge Base
Optional Accessories
-
-
-
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Knowledge Base
-
Radio Frequency Receiver for Standard RF Series Data Loggers. AC power required, RS232 Connection.
Knowledge Base
-
100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath.
Knowledge Base
-
