Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The RFVolt101A is a low level, DC Voltage data logger with built-in, wireless (RF) transmitter. Featuring custom engineering units set through the software, any sensor that provides an analog voltage output signal can be monitored and recorded. Using the RFC101A receiver, this data logger can transmit data up to 120 feet, line of sight. Built-in memory also stores data internally. Available in three voltage ranges.
The RFVolt101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
The RFVolt101A is available with an extended warranty.
Note: Approved for use in the US and Canada only.
VOLTAGE
| Voltage Range | ±100mV, 0 to 15V, and 0 to 30V |
|---|---|
| Voltage Resolution | ±100mV: 5μV 0 to 15V: 0.5mV 0 to 30V: 1mV |
| Voltage Calibrated Accuracy | ±100mV: ±0.01% 0 to 15V and 0 to 30V: ±0.1 |
WIRELESS
| RF Carrier Frequency | 418 ±0.075MHz |
|---|---|
| RF Baud Rate | 4800 |
| Output Power | <0dBm typical (<1mW) |
| Receiver Sensitivity (RFC101A) | -90dBm typical |
| Typical outdoors Line of sight | Up to 120' (36m) |
| Typical Indoors line of sight | Up to 40' (12m) |
GENERAL
| Memory | 8,191 readings |
|---|---|
| Reading Rate | 30 seconds up to 12 hours |
| Baud Rate | 57,600 |
| LED Indicators | Red & Green |
| Battery Life | 1 year |
| Material | ABS plastic |
| Dimensions | 1.7" x 2.7" x 0.8" plus 2.0" antenna (42mm x 69mm x 21mm + 51mm antenna) |
| Operating Environment | -30~+70°C; 0~95%RH non-condensing |
| Required Interface Package | RFC101A or RFC200A |
| Approvals | US(FCC), CA(IC) |
Product Tables
| Part # Suffix | -100mV | -15V | -30V |
|---|---|---|---|
| Measurement Range | ±100mV | 0 to 15V | 0 to 30V |
| Resolution | 5μV | 0.5mV | 1mV |
| Calibrated Accuracy | ±0.01% | ±0.1 | ±0.1 |
Accessories
Required Accessories
Check items to add to the cart or select all
-
Radio frequency receiver for Standard RF Series Data Loggers. Includes Wireless Receiver, MadgeTech Software CD, Software Manual, Power Supply, IFC200, and Serial to USB Convertor (For RF Receiver).
Knowledge Base
Optional Accessories
-
-
-
-
3.6 Volt, Lithium Battery, 750 mAH
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
3.6 Volt, Lithium Battery, 750 mAH (pack of 14)
Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
Knowledge Base
-
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Knowledge Base
-
Radio Frequency Receiver for Standard RF Series Data Loggers. AC power required, RS232 Connection.
Knowledge Base
Click and Drag to Rotate