Product Applications
- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The TransiTempII-RH is a stand alone, rugged humidity and temperature data logger. This device is ideal for monitoring and recording the temperature and humidity of products during storage and shipping.
No external probes are required to achieve its high performance as both the temperature and humidity sensors are internal to the device. The TransiTempII-RH has a humidity resolution of 0.1% RH and typical accuracy of ±3.5% RH at 25°C. It can record up to 16,383 readings per channel.
The TransiTempII-RH is equipped with three status LED red/green/yellow indicators. It can be programmed through software to start immediately, delay start for up to 30 days, or be set to start using the magnetic switch. With the MadgeTech Data Logger software, the data can be displayed with a variety of different configurable options. Users have the ability to view temperature data in degrees Celsius, Fahrenheit, Kelvin or Rankine. Humidity readings can be displayed in %RH, water vapor concentration or even dew point. For additional analysis, data can be easily exported to MS Excel® by simply clicking a button.
The TransiTempII-RH is available with an extended warranty.
No external probes are required to achieve its high performance as both the temperature and humidity sensors are internal to the device. The TransiTempII-RH has a humidity resolution of 0.1% RH and typical accuracy of ±3.5% RH at 25°C. It can record up to 16,383 readings per channel.
The TransiTempII-RH is equipped with three status LED red/green/yellow indicators. It can be programmed through software to start immediately, delay start for up to 30 days, or be set to start using the magnetic switch. With the MadgeTech Data Logger software, the data can be displayed with a variety of different configurable options. Users have the ability to view temperature data in degrees Celsius, Fahrenheit, Kelvin or Rankine. Humidity readings can be displayed in %RH, water vapor concentration or even dew point. For additional analysis, data can be easily exported to MS Excel® by simply clicking a button.
The TransiTempII-RH is available with an extended warranty.
TEMPERATURE
| Temperature Sensor | Semiconductor |
|---|---|
| Temperature Range | -40 to +80°C |
| Temperature Resolution | 0.1°C |
| Temperature Calibrated Accuracy | ±0.5°C (-10 to +40°C) |
HUMIDITY
| Humidity Sensor | Capacitive Polymer |
|---|---|
| Humidity Range | 0~100%RH |
| Humidity Resolution | 0.1%RH |
| Humidity Calibrated Accuracy | ±5%RH (±3.5%RH typical at 25°C) from 20 to 80%RH, +10 to 40°C |
GENERAL
| Memory | 16,383 readings per channel |
|---|---|
| Reading Rate | 5 seconds up to 30 minutes |
| Baud Rate | 38,400 |
| LED Indicators | Red, Yellow, and Green |
| Push-Button Start | Yes |
| Battery Life | 1 year |
| Material | ABS plastic, white, polycarbonate labeling |
| Dimensions | 3.3" x 2.1" x 0.4" (83mm x 54mm x 11mm) |
| Operating Environment | -40~+80°C, 0~100%RH non-condensing |
| Required Interface Package | IFC300 |
| Approvals | Approved for carriage on Delta® Mainline Flights |
Accessories
Required Accessories
Check items to add to the cart or select all
-
Interface cable package for the TransiTempII and Cryo-Temp Series Data Loggers. USB Connection with Docking Station Cradle.
Interface Cables Compatibility Guide | Knowledge Base
Optional Accessories
-
-
The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp, TransiTempII, or the TransiTempII-RH. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.
Knowledge Base
