- About Us
- Products
- Applications
- Services
- Support
- Press Room
- Contact Us
- Contact Info
- Email for Sales
- Email for Support
- Email for Info
- Email for RMAs
- Chinese Website
- Sales Offices
- Distributors
- Job Opportunities
The QuadProcess is a four channel, battery powered, stand alone low level DC current data logger. The Device records time and date stamped DC current data from external sensors, transducers and many other sources.
The data logger features user-programmable Engineering Units and offset/gain calculations so input signals can be scaled to proper units being measured. For example, a water meter with a 4-20mA output can be displayed as liters or gallons, etc.., in the software graph and data. Negative current signals can be monitored and recorded, for a broad range of applications.
Three different DC current ranges are available ±1mA, ±25mA or ±100mA. The QuadProcess can measure and record data for up to 32,767 readings per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The QuadProcess makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
The QuadProcess is available with an extended warranty.
The data logger features user-programmable Engineering Units and offset/gain calculations so input signals can be scaled to proper units being measured. For example, a water meter with a 4-20mA output can be displayed as liters or gallons, etc.., in the software graph and data. Negative current signals can be monitored and recorded, for a broad range of applications.
Three different DC current ranges are available ±1mA, ±25mA or ±100mA. The QuadProcess can measure and record data for up to 32,767 readings per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The QuadProcess makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.
The QuadProcess is available with an extended warranty.
CURRENT
| Current Range | ±1mA, ±25mA , ±100mA |
|---|---|
| Current Resolution | ±1mA: 0.05μA ±25mA: 1μA ±100mA: 5μA |
| Current Calibrate Accuracy | ±1mA: ±0.5%FSR at 25°C ±25mA and ±100mA: ±0.1%FSR at 25°C |
| Current Input Impedance | ±1: 50Ω ±25mA: 10Ω ±100: 2Ω |
GENERAL
| Memory | 32,767 readings per channel |
|---|---|
| Reading Rate | 1 second up to 12 hours |
| Baud Rate | 2,400 |
| Channels | 4 |
| LED Indicators | None |
| Battery Life | 1 year |
| Material | Anodized aluminum |
| Dimensions | 3.5" x 4.4" x 1.0" (89mm x 112mm x 26mm) |
| Operating Environment | -20~+60°C, 0~95%RH non-condensing |
| Required Interface Package | IFC110 or IFC200 |
Product Tables
| Nominal Range | ±1mA | ±25mA | ±100mA | |
|---|---|---|---|---|
| Measurement Range | ±1.5mA | ±30mA | ±120mA | |
| Input Range | 0 to 2.5V | |||
| Resolution | 0.05μA | 1μA | 5μA | |
| Calibrated Accuracy at 25°C | ±0.5%FSR at 25°C | ±0.1%FSR at 25°C | ||
| Input Imedence | 50Ω | 10Ω | 2Ω | |
Accessories
Required Accessories
Check items to add to the cart or select all
-
USB Interface cable package for Standard Series Data Loggers.
Specifications Sheet | Compatibility Guide
Knowledge Base
Optional Accessories
-
MadgeTech 4 Secure Validation Package
IQ/OQ/PQ Secure software validation work book and software package.
Secure Software Features
Compatibility List
Specification Sheet
Requirement Checklist
IQ/OQ/PQ On-Site Service
Knowledge Base -
Split core current tranducer, monitors 0-50,100 or 200ADC (slide switch selectable). No status LED's, outputs a 4-20mA and 0-50VDC signal (requires external power).
Specification Sheet | Knowledge Base
-
RS232 (Serial) Interface cable package for Standard Series Data Loggers.
Interface Cables Compatibility Guide | Knowledge Base
-
Split core current switch, monitors 3.5-100Amps, adjustable set point between 3.5-100Amps, auto calibration, status LED's, outputs a 4-20mA signal.
Knowledge Base
-
Click and Drag to Rotate
|
|
|
|
